Presenting from a Networked Computer
6.For an Ad Hoc connection, set the following properties:
■Set the Authentication Mode to Ad Hoc.
■Match the Desired SSID and WEP Encryption to the settings on the projector.
■If a channel setting is available, set the channel to Auto.
For an Infrastructure connection, set the following properties:
■Set the Authentication Mode to Infrastructure.
■Match the Desired SSID and WEP Encryption to the access point settings as specified by the network administrator.
■If a channel setting is available, set the channel to Auto.
7.Click OK.
8.
9.
■For an Ad Hoc connection, set the following properties:
❏Select Obtain an auto IP address.
❏Select Obtain DNS server address automatically.
■For an Infrastructure connection, check with your system administrator to obtain the correct settings.
Showing Presentations
This section describes how to show presentations on a computer.
■“To start a presentation” on page 24
■“To stop showing your presentation” on page 25
■“To include other presenters” on page 26
■“To disconnect and free the projector” on page 27
User’s Guide | 23 |