Code | Suggestions |
03CCh | Run BIOS Setup and check the floppy drive |
| type. Rerun the test with another floppy disk. |
| Replace the floppy drive. Replace the |
| motherboard. |
03EEh - | Check the connectors on the floppy drive, |
03FFh | external module bay, and motherboard. Rerun |
| the test with another floppy disk. Replace the |
| floppy drive. Replace the motherboard. |
Keyboard Tests | |
0400h - | Replace the motherboard. |
0401h |
|
0410h - | Check the keyboard flex cable connection. |
0414h | Replace the keyboard. Replace the |
| motherboard. |
0415h | Replace the motherboard. |
0416h - | Replace the keyboard. Replace the |
0418h | motherboard. |
Serial Port Tests | |
0601h | For the external loopback test, make sure the |
| loopback connector is installed and constructed |
| properly. For the external or internal loopback |
| test, replace the motherboard. |
0602h | Replace the motherboard. |
0603h | For the external loopback test, make sure the |
| loopback connector is installed and constructed |
| properly. For the external or internal loopback |
| test, replace the motherboard. |
0604h - | Replace the motherboard. |
0605h |
|
0606h | For the external loopback test, make sure the |
| loopback connector is installed and constructed |
| properly. For the external or internal loopback |
| test, replace the motherboard. |
0607h | Make sure the loopback connector is installed |
| and constructed properly. Replace the |
| motherboard. |
0608h - | Replace the motherboard. |
0617h |
|
Parallel Port Tests | |
0701h | For the external loopback test, make sure the |
| loopback connector is installed and constructed |
| properly. For the external or internal loopback |
| test, replace the motherboard. |
0702h | For DiagTools 2.2, replace motherboard. For |
| earlier version, no repair (printer test not |
| supported). |
0703h | Run BIOS Setup and disable ECP for the |
| parallel port, then rerun the test. Replace the |
| motherboard. |
0704h - | Replace the motherboard. |
0706h |
|
0707h | Connect the loopback connector. |
0708h | Replace the motherboard. |
Audio Tests | |
0801h - | If this error also occurs for an external |
08C2h | headphone, replace the motherboard. |
| Otherwise, check the speaker connection, |
| replace the speaker. If it occurs only for an |
| external headphone, replace the motherboard. |
08D0h- | Replace the motherboard. |
08F3h |
|
Code | Suggestions |
9003h - | (See Microphone Tests near end of table.) |
9004h |
|
9018h – | (See NMA Sound Tests near end of table.) |
901Ah |
|
Video Tests | |
0900h - | Replace the motherboard. |
0920h |
|
8000h, | (See LCD Tests near end of table.) |
9016h - |
|
9017h |
|
| |
0A00h | Insert a CD in the drive. |
0A01h | Rerun the test. Replace the |
0A02h | No repair. (Automatic close not supported.) |
0A03h | Insert a different CD in the drive. Check the |
| connectors on the |
| module bay, and motherboard. Replace the |
| |
0A04h | Insert a computer CD in the drive. |
0A05h | Insert a different CD in the drive. Check the |
| connectors on the |
| module bay, and motherboard. Replace the |
| |
0A06h | Insert a computer CD in the drive. Replace the |
| drive. |
| For earlier diagnostics, insert an audio CD in |
| the drive. |
0A07h | Rerun the test. Replace the drive. |
0A08h | Insert an audio CD. Replace the drive. |
0A09h | Rerun the test. Replace the drive. |
0A10h | Insert an audio CD. Replace the drive. |
0A11h | Rerun the test with an audio CD. Replace the |
| drive. |
0A12h | Insert a different multisession CD. Replace the |
| drive. |
SMBus Tests | |
0E00h - | Replace the motherboard. |
0E10h |
|
ATAPI Removable Tests | |
0F01h | Connect the |
0F02h - | Rerun the test. Insert a different disk in the LS- |
0F03h | 120 drive. Check the connectors on the |
| drive, external module bay, and motherboard. |
| Replace the |
0F04h - | Replace the |
0F05h |
|
0F06h | Rerun the test. Insert a different disk in the LS- |
| 120 drive. Check the connectors on the |
| drive, external module bay, and motherboard. |
| Replace the |
0F07h | Replace the |
0F08h | Rerun the test. Insert a different disk in the LS- |
| 120 drive. Check the connectors on the |
| drive, external module bay, and motherboard. |
| Replace the |
0F09h | Replace the |
TI CardBus Tests | |
1201h | Memory space not available. Remove any |
| attached ISA or PCI cards. |
HP OmniBook 900 |