Internal Hard Disk Drive | If boot security is enabled, sets whether a password is stored | Disabled |
Lock | on the hard disk. Secures data on the disk if the disk is moved |
|
| to another computer. |
|
Removable Device Boot | Sets whether the floppy drive or other removable device is a | Enabled |
| boot device. |
|
Power Menu
If ACPI is activated in Windows 98, ACPI settings override settings in this menu.
Power Management Mode | Disables |
| allows customized |
Smart CPU Mode | Enables automatic CPU power savings. Absence of keyboard, |
| mouse, and hard disk activity could cause slower CPU |
| response. For an OmniBook 900†, this should normally be off |
| to avoid time sensitive |
| both battery and ac power. |
Default
Max Power Savings
OB 900B: On
OB 900†: Off
Standby
Suspend
Hibernate
Sets the period of inactivity after which the computer goes from On to Standby power mode.
Sets the period of inactivity after which the computer goes from Standby to Suspend power mode. (Skips Standby mode if that
Sets whether the computer goes from Suspend to Hibernate power mode after the indicated period of inactivity. (Skips Suspend mode if that
2minutes
4minutes
4 hours
Hard Disk | Sets the period of hard disk inactivity after which the hard disk | 2 minutes |
| stops spinning. Also affects a hard disk drive in the |
|
| module bay. |
|
Sets whether power management | Disabled | |
| adapter is connected. |
|
Power Button Mode | Sets the action of the blue power button when pressed for less | Suspend |
| than 4 seconds. |
|
Lid Switch Mode | Sets the action when the OmniBook lid closes. | Turn Off LCD |
Resume on Serial Ring | Sets whether the system resumes from Suspend if a ring | Enabled |
| signal is received. |
|
Resume on Time of Day | Sets whether the system resumes from Suspend at a defined | Disabled |
| time of day. |
|
Resume Time | Sets the |
|
| Suspend if enabled. |
|
Auto Suspend on Undock | Sets whether the OmniBook suspends after undocking. | When Lid Closed |
Auto | Sets whether the OmniBook turns on after docking. | Enabled |
|
|
|
Boot Menu |
| Default | |
Removable Device | Shows the order of boot devices. Move the entries to | 1. | Removable Device |
Hard Drive | change the order. | 2. | Hard drive |
| 3. |
Exit Menu
Save Changes and Exit
Discard Changes and Exit
Saves Setup changes, exits, and reboots.
Discards Setup changes since last save, exits, and reboots. Does not affect Security and date/time changes.
Get Default Values | Restores default settings, stays in Setup. Does not affect |
| Security and date/time settings. |
Load Previous Values | Discards Setup changes since last save, stays in Setup. Does |
| not affect Security and date/time changes. |
Save Changes | Saves Setup changes, and stays in Setup. Security settings |
| are saved when changed. |
†Models called 900† in this manual have no marking in the serial number, whereas models called 900B have 900 B after the serial number.
HP OmniBook 900 |