HP Book 900 manual Reference Information HP OmniBook

Type of Imperfection

Unipac 13" TFT, XGA

Electrical Imperfections:

Bright dots (a)

Dark dots (a)

Mechanical Imperfections:

Spots (b)

Lines (c)

Polarizer scratches (d) Polarizer dents, bubbles (e)

Imperfections Not Allowed

∙9 or more single bright dots.

∙10 or more single dark dots.

∙18 or more total bright and dark dots.

∙4 or more double bright dots.

∙5 or more double dark dots.

∙Any occurrence of triple bright dots (or triple dark dots).

∙Any occurrence of 2 bright dots within 15 mm.

∙Any occurrence of 2 dark dots within 5 mm.

∙5 or more spots 0-0.5 mm avg. dia.

∙4 or more lines 0-3 mm long.

∙7 or more scratches 0-30 mm long.

∙7 or more dents 0-0.5 mm avg. dia.

∙Any spot or dent over 0.5 mm avg. dia.

∙Any line over 3 mm long.

∙Any scratch over 30 mm long

Definitions of imperfections:

aBright or dark dot: A subpixel (red, green, or blue dot) that is stuck on or off.

bSpot: A point on the display that appears dark or bright and does not change in size. Caused by foreign circular matter on the backlight.

cLine: A line on the display that appears dark or light and does not change in size. Caused by contamination (lint, hair) behind the display.

dPolarizer scratch: A light line that is visible on a darker background and does not change in size.

ePolarizer dent or bubble: A light spot with a darker border that appears on a lighted display and does not change in size.

5-4 Reference Information HP OmniBook 900