Plantronics CT14 Calling Features, Place the dial pad in the base cradle for several seconds

Page 10

Settings

Re-registering the Dial Pad

After the dial pad is de-registered, you must re-register the dial pad before you can use it.

1Place the dial pad in the base cradle for several seconds.

2When the dial pad has registered to the base, the LCD will display Registration complete, then show the dial pad ID number.

If the display shows Registration failed, try the process again.

Calling Features

Muting the Ringer (Temporarily)

The dial pad must be off the base to mute the ringer.

1While the phone is ringing, press or to mute the ringer for this call.

2The phone will ring again on the next call.

Placing a Call on Hold

1During a call, press to place the caller on hold. The display screen will read Line On Hold.

2To return to the party on hold, press . The phone will return to the holding party.

NOTE Once five minutes has passed, the on hold party’s line will be disconnected.

Redialing a Number

You can quickly redial the last five numbers dialed on each dial pad.

1With the phone in standby, press the to open the redial list.

2Use and or to scroll through the redial list.

3When you find the number you want to dial, press .

NOTE You can also press

 

before you open the

 

 

redial list. Find the phone number you want to dial, and then press

 

.

14

Calling Features

Deleting a Redial Record

1With the phone in standby, press .

2Use and to scroll through the redial list.

3When you find the redial number you want to delete, press and select Delete Entry.

4When the phone asks you to confirm, select Yes.

Adjusting the Audio Tone

If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the headset while on a call. Your phone gives you three audio tone options: Low, Natural and High; the default setting is Natural Tone.

1To adjust the audio tone while on a call, press .

2Move the cursor to select Audio Tone, and then press .

3Move the cursor to select desired option and then press to confirm.

Locating the Dial Pad

1To locate a misplaced dial pad, press PAGE on the base when the phone is in standby.

2The dial pad(s) connected to the paging base will beep for one minute, and Paging appears on the dial pad display.

3To cancel paging, press PAGE again or any key on the found dial pad.

Low Battery Alert

 

When Low Battery - Charge Handset appears

en

in the dial pad display and the phone is in standby,

 

none of the keys will operate.

 

If you are on a call, complete your conversation as quickly as possible, and return the dial pad to the cradle. The battery pack needs to be charged when the empty battery icon appears.

15

Image 10
Contents Plantronics CT14 Contents Package Contents Key Message WAITING* indicator LED Talk / Flash keyBase Components Dial Pad Components Down key UP key END keyWearing the Dial Pad with the Belt Clip Installing the Dial Pad BatteryDo not force. Plastic connectors will fit in only one way Remove the belt clipWearing the Headset Hooking Up the BaseCharging the Dial Pad Once the dial pad is fully chargedPlacing, Receiving and Ending Calls Adjusting Volume and Muting CallsSettings Traveling Out-of-RangeWhen you hear the tone you want to use Press to confirm Press and hold and for at least five seconds Calling Features Place the dial pad in the base cradle for several secondsCreating Phonebook Entries Press when you are finishedPhonebook Entering Text from Your Dial PadTo close the phonebook and return to standby, press Move the cursor to select Yes and pressSubscription Services Use and to scroll through the listPress to dial the number Setting Voice Mail Signaling Tone One-touch Voice Mail AccessResetting the Voice Message Waiting Indicator Using Multiple CT14 Units Together TroubleshootingBattery Warnings Important Safety and Operational InformationLimited Warranty GeneralRegulatory Notices Guía del usuario Ajustes ÍndicePara comenzar Funciones de llamadaAgenda de teléfonos Contenido del paqueteServicios con suscripción Charge Carga ComponentesAntena de la base/soporte del auricular Indicador de Mensaje EN ESPERA* LEDQuite el clip para el cinturón jalando Instalar la pila del tecladoInstalar el clip para el cinturón De un lado del clip para soltar la pestaña del orificioLlevando el auricular Instalar la baseCargar el teclado Inserte el teclado en el alojamiento de carga de la baseSalir fuera del alcance Ajustar el volumen y silenciar llamadasLlamar, recibir llamadas y colgar AjustesTono de botones Tono del teclado Mueva el cursor o para seleccionar un tono de timbrePara activarla presione Para confirmarPara cambiar el modo de marcación, presione Funciones de llamada Cuando termine, presione Agenda de teléfonosCrear entradas en la agenda de teléfonos Escribir texto con el tecladoMueva el cursor para seleccionar Sí y presione Usar la llamada en espera Servicios con suscripciónMarcar en cadena desde la agenda de teléfonos Ver la lista de ID de contactosPresione para marcar el número Para programar el código de área local, presioneConfigurar el tono de aviso del buzón de voz Acceso al buzón de voz con una sola teclaEscuchará un tono de confirmación Restablecer el indicador de mensajes de voz pendientesSolución de problemas Usar varias unidades CT14 al mismo tiempoAdvertencias Advertencias acerca de la pilaAvisos sobre normativas Art master