Information on DNS, see

HP Traffic Director Server Appliances Getting Started Guide

	2. If using DNS, type your information as indicated at the prompts.
	For example:
NOTE: For more	monitor>dns
information on DNS, see	Would you like to configure DNS (yes,no)?
“Configuring DNS” later	[no] --->yes
in this chapter.	Enter Domain name(‘-’ to cancel)
	--->crisc.com
	Enter the IP Address of the Primary name
	server (‘-’ to cancel) -->10.6.3.5
	Specify additional name server (<return> to
	end) ---> 10.6.3.10
	3. Save the configuration file by typing your information as
	indicated at the prompts. For example:
	monitor>save
	List of currently saved configuration file(s).
	You may save over an existing configuration
	file or enter a new name.
	<configuration files are listed here>
	‘active.cfg’ is the last booted configuration.
	Enter configuration file name (- to cancel):
	[active.cfg] --->-
	Configuration save canceled!
	4. Reboot the system. For example:
	monitor>boot
	<system information is displayed here>
	Select a boot configuration from the following
	files
	<configuration files are listed here>
	Boot configuration file name? [active.cfg]
	--->
	Do you really want to boot ‘active.cfg’?
	[y] --->
	Please stand by, the system is being booted.
	..... Done
	5. Type your new root password at the prompts. For example:
	New root password (8 to 128 significant
	characters) --->password
	Retype new password --->password

“Configuring DNS” later