11
Configure Host MultiVOIP
Configuring Your Host MultiVOIP
Configuring your Host MultiVOIP involves software loading
and configuration.
The software loading procedure does not provide every screen
or option in the loading process. It is assumed that a technical
person with a thorough knowledge of Windows and the
software loading process is performing the installation.
Additional information on the MultiVOIP software is provided in
the User Guide supplied with your MultiVOIP.
If you are installing a MultiVOIP behind a firewall, you need to
add the following UDP ports to your firewall.
900 Signaling Information 5004 RTP Packets
5000 Status Information 5005 RTCP Packets
Refer to your firewall user documentation to enter and open
these ports.
1. Make certain that your MVP 110 has been properly cabled
and that the power is turned on.
2. Insert the MVP 110 CD into your CD-ROM drive. The CD
should start automatically. It may take 10 to 20 seconds
for the Multi-Tech CD installation window to display.