Multi-Tech Systems MVP110 quick start Cabling Your MultiVOIP

Cabling

Cabling Your MultiVOIP

Cabling your MultiVOIP involves making the proper Power, Command Port, phone system, and Internet connections. Figure 5 shows the back panel connectors and the associated cable connections. The following procedure details the steps necessary for cabling your MultiVOIP.

1.Connect the power supply to a live AC outlet, then connect it to the MultiVOIP as shown in Figure 5.

Power Connection

FXS

Command Port Connection

Hub

Network Connection

Figure 5. Cable Connections

2.Connect the MultiVOIP to a PC using the RJ-45 to DB9 (female) cable provided with your unit. Plug the RJ-45 end of the cable into the Command port of the MultiVOIP and connect the other end to the PC serial port you are using. See Figure 5.

3.Connect a network cable to the Ethernet connector on the back of the MultiVOIP. Connect the other end of the cable to your network.

4.If you are connecting a station device such as an analog telephone, a fax machine, or a Key Telephone System (KTS) to your MultiVOIP, connect an RJ-11 cable to the

9