25
Configure Client MultiVOIPs
match your IP network, select the Frame Type from the
Frame Type list. The Frame Type choices are TYPE_II
and SNAP.
4. In the Port Address group, enter the IP Address and IP
Mask. In the Gateway Address group, enter the gateway
IP address for the client unit.
The IP address is your unique LAN IP address, and the
Gateway address is the IP address of the device
connected to the Internet/Intranet.
Click OK when you are finished. The Channel Setup
dialog box displays.
5. The Channel Setup dialog box defines the voice coder,
fax parameters, and regional telephone parameters for the
voice/fax channel.
6. If you are connecting a station device such as an analog
telephone, a fax machine, or a Key Telephone System
(KTS) to the Voice/Fax connector on the back of the unit.