MultiVOIP Quick Start Guide
26
Check with your in-house telephone personnel to verify
whether your local PBX dial signaling is Pulse or DTMF
(tone). Set the Regeneration option accordingly. In the
Max Dial Digits box, enter the maximum number of digits
allowed when dialing a phone number. The default setting
is 5. In the Inter Digit Time box, enter the maximum
amount of time in milliseconds that the unit will wait before
mapping the dialed digits to an entry in the Phone
Directory Database. If too much time elapses between
digits and the wrong numbers are mapped, you hear a
rapid busy signal. If this happens, hang up and dial again.
This option is available for all interface types. In the Flash
Timer box, enter the time, in milliseconds, for the duration
of flash hook signals output on the interface.
To dedicate the voice/fax channel to a remote voice/fax
channel, (so you will not have to dial the remote channel)
select the Auto Call Enable check box. Enter the phone
number of the remote VOIP in the Phone Number box.
The Voice/Fax tab displays the parameters for the voice
coder, faxing, and DTMF gain.
8. To change the voice coder, select the new voice coder
entry from the Voice Coder list.