USING YOUR RANGE
THE ELECTRONIC OVEN CONTROL
ON
BAKE
BROIL
START ?
HEAT
CLEAN
Electronic display
Auto clean pad
(p. 23)
Bake pad
(pp. 15, 17)
| DOOR LOCKED |
|
|
| Start/enter pad | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| START | OFF |
|
| (pp. 14, 15, 16, | ||||
BAKE |
| CUSTOM | AUTO | TEMP | 17, 19, 23) | |||||||||
|
|
|
|
|
|
| ||||||||
| BROIL | CLEAN |
| ENTER |
| CANCEL | ||||||||
|
|
|
|
|
|
| Off/cancel pad | |||||||
|
|
|
|
|
|
|
| 5 SEC |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| (pp. 15, 16, 19, | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| 23, 24) | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Custom | Temperature pad |
broil pad | (pp. 15, 17, 19, 23) |
(p. 19) |
|
Display | Using the control lock |
•When you first plug in the range, “PF” will appear on the display until you press any command pad. If “PF” again appears on the display, your electric- ity was off for a while.
•When you are using the oven, the display will show preheat times and temperature settings.
•When you are not using the oven, the display will be blank.
•When setting a function, if you do not press START/ENTER within 5 seconds, the Start? indicator light will flash. If you do not press START/ENTER within 5 minutes, the function will be canceled.
Indicator lights
An indicator light to the left of the display lights up when you are in a setting. An indicator light on the display lights up when the oven is on.
The control lock lets you disable the control panel command pads. The control lock comes in handy when you want to prevent others from using the oven.
NOTES:
•You can only use control lock when the oven is not in use or the control has not been set.
•Set the control lock when cleaning the control panel to prevent yourself from accidentally turning on the oven.
To lock the control panel:
Press and hold START/ENTER for 5 seconds.
You will hear a single tone and “Loc” will START appear on the temperature display for
ENTER 5 seconds. “Loc” will then appear when- ever a command pad is pressed.
To unlock the control panel:
Press and hold START/ENTER for 5 seconds. You will hear a single tone and “Loc” will disappear
START from the temperature display.
ENTER
5 SEC
14