Whirlpool RF344BXH warranty Setting the Controls, Time

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS

1.Press AUTO CLEAN.

The clean indicator light will light up.

This will automatically set a 31⁄2-hour Self-Cleaning cycle.

NOTE: There will be a 30-minute cool-down

1⁄2 hour before the cycle is over.

PRESS YOU SEE ON

AUTO

CLEAN

2. Set the cleaning time (optional).	PRESS	YOU SEE	ON
If you want a Self-Cleaning cycle longer or
shorter than 31⁄2 hours, use the hour and
minute pads to set the cleaning time you want.
Press the “up” (s) or “down” (t) pad(s) until a
time between 21⁄2-41⁄2hours shows on the display.
•Use 21⁄2 hours for light soil.		(example for 41⁄2-hour cleaning
•Use 31⁄2-41⁄2hours for average to heavy soil.		time)

3.Start the oven:

The on and heat indicator lights will light up.

NOTES:

•Make sure the door is closed all the way. If the door is open even a little, it will not lock. If the door is closed, it will lock after you press

START/ENTER.

•Do not attempt to open the oven door while locking.

PRESS YOU SEE

START

ENTER

5 SEC

ON

4.After the Self-Cleaning cycle starts:

The door locked indicator light will light up when the oven door locks.

5. After the Self-Cleaning cycle ends and the oven	YOU SEE
reaches normal baking/roasting temperatures:

The clean, door locked, and on indicator lights will go out and the door unlocks.

ON

Press OFF/CANCEL to clear the display. PRESS

OFF

CANCEL

6.After the oven cools to room temperature, wipe off any residue or ash with a damp cloth or sponge.

If needed, touch up spots with a mild abrasive cleanser or cleaning sponge.

continued on next page

23