Whirlpool RF344BXH Removing The Oven Door, To remove, To replace, Caring For Your Range, pin hole

Models: RF344BXH

1 36
Download 36 pages 46.17 Kb
Page 30
Image 30
REMOVING THE OVEN DOOR

CARING FOR YOUR RANGE

REMOVING THE OVEN DOOR

For normal use of your range, you do not need to remove the door. However, if you find it necessary to remove the door, follow the instructions in this section.

NOTE: The oven door is heavy.

Before removing the door:

1.Use a putty knife or screwdriver and insert it at the bottom corner of the door stop clip.

2.Pry door stop clip free and remove from front frame hinge slot. Take care not to scratch porce- lain.

3.Repeat procedure for other door stop clip.

Door removal

Door stop clip
pin hole

 

Range
Hinge

Front frame

hanger
hinge slot

To remove:

1.Open the oven door. Insert door removal pins, included with your range, into both hinge hangers. Do not remove the pins while the door

is removed from the range.

3.Grasp the door on the sides with your fingers on

the front of the door and your thumbs on the inside surface.

2.Carefully close the door until it rests against the door removal pins.

4.Pull door straight up, then toward you. Hinge hangers will slide out of front frame hinge slot.

To replace:

NOTE: The door removal pins you inserted must still be in both hinges.

1.Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.

30

Page 30
Image 30
Whirlpool RF344BXH Removing The Oven Door, To remove, To replace, Caring For Your Range, Before removing the door, Hinge