Printing Images Directly from the Camera
You can connect the camera using the cradle or dock to any
1.Check that the printer is turned on, there is paper in the printer, and there are no printer error messages.
2.Connect the larger, flat end of the USB cable to the corresponding connector on the
TIP: The PictBridge connector is usually located on the front of the printer.
3.Attach the other connector to the cradle or dock.
4.Set the camera’s USB Configuration setting to Digital Camera (see page 120), then place the camera in the cradle or dock.
5.When the camera is connected to the printer, a Print Setup menu displays on the camera. If you already selected images to print using the camera’s HP Instant Share Menu, the number of images selected is shown. Otherwise, Images: ALL is displayed.
Transferring and Printing Images | 99 |