4.Close and lock the battery/memory card compartment.
Inserting an SD/SDHC/SDXC Memory Card
Expand your camera’s storage by using SD, SDHC or SDXC memory cards.
1.Unlock and open the Battery/memory card compartment at the bottom of the camera.
2.Insert the SD/SDHC/SDXC card into the memory card slot with the metallic part facing the back side of the camera.
3.Push the SD/SDHC/SDXC card into the memory slot until it clicks into place.
4.Close and lock the Battery/memory card compartment.
To remove the SD/SDHC/SDXC card
1.Unlock and open the battery/memory card compartment.
2.Gently push the card until it pops out.
3.Pull out the card carefully.
Windows XP are not support SDXC card (exFAT format). But in Windows XP (Service Pack 2 or 3), you can download exFAT patch update to support SDXC card.
Turning the Power On and Off
There are two ways to turn on the camera:
•The startup image displays briefly and the startup sound plays if enabled. The zoom lens extends and the camera is turned on in Record mode.
•The camera is turned on in Playback mode. The zoom lens is not extended.
To turn off the camera, press the Power button.
See "Modes" on page 15 to know more about Record and Playback mode.
Please remove the lens cover before doing Power on.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial settings of your camera. First is the setup of language menu. Specify in which language menus and messages are to be displayed on the LCD monitor.
Setting the Language
1.Press 
, 
, 
or 
to move through the selection.
2.Select a language, and then press OK to apply.
Setting the Date & Time
1.Press 
or 
to move through the selection.
13