HP Pro 6305 manual

Page 31

10.If you are not installing a new expansion card, install an expansion slot cover to close the open slot.

CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation.

11.To install a new expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis so that the bracket on the card is aligned with the open slot on the rear of the chassis. Press the card straight down into the expansion socket on the system board.

Figure 2-13Installing an Expansion Card

NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot.

12.Rotate the slot cover retention latch back in place to secure the expansion card. Figure 2-14Closing the Expansion Slot Retainer

13.Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed.

Removing or Installing an Expansion Card 23

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Small Form Factor SFF Hardware Upgrades Preventing Electrostatic Damage Grounding Methods Viii Standard Configuration Features Product Features1Front Panel Components Microtower MT Front Panel Components2Front Panel Components Small Form Factor SFF Front Panel Components3Rear Panel Components Microtower MT Rear Panel Components4Rear Panel Components Small Form Factor SFF Rear Panel Components5Media Card Reader Components Media Card Reader ComponentsKeyboard 6Keyboard Features7Windows Logo Key Functions Using the Windows Logo KeyAny number key 8Microtower Serial Number and Product ID Location Serial Number LocationServiceability Features Microtower MT Hardware UpgradesRemoving the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel Replacing the Front Bezel Removing Bezel Blanks1System Board Connections System Board ConnectionsDIMMs Installing Additional MemoryDDR3-SDRAM DIMMs Populating Dimm Sockets Installing DIMMsPage Removing or Installing an Expansion Card Page Page Page 2Drive Positions Drive PositionsMedia Installing and Removing Drives16Extra Guide Screw Locations Removing a 5.25-inch or 3.5-inch Drive from a Drive Bay 19Removing the Drives Microtower MT Hardware Upgrades Installing a 5.25-inch or 3.5-inch Drive into a Drive Bay Page Page Removing a Hard Drive from a Drive Bay Installing a Hard Drive into an Internal Drive Bay Page Page Page Cable Lock Installing a Security LockPadlock HP Business PC Security Lock Page Page Page Front Bezel Security Page Small Form Factor SFF Hardware Upgrades Removing the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel 4Removing a Bezel Blank Changing from Desktop to Tower Configuration Black ESATA Adapter Cable Sata Installing Additional Memory Installing DIMMs 8Rotating the Drive Cage Up Installing Additional Memory Page Removing or Installing an Expansion Card Page Page Page 16Drive Positions 17Extra Guide Screw Locations Page Removing a 5.25-inch Drive from a Drive Bay Page 21Removing the 5.25-inch Drive Installing a 5.25-inch Drive into a Drive BayPage Page Removing a 3.5-inch Drive from a Drive Bay Page Installing a 3.5-inch Drive into a Drive Bay Page Page Page Page Page 40Installing a Cable Lock HP Business PC Security Lock Page Page Page Front Bezel Security Page Battery Replacement Type Page Removing and Replacing a Removable 3.5-inch Sata Hard Drive Page Figure B-5Replacing the Hard Drive Page Page Smart Cover FailSafe Key Unlocking the Smart Cover LockPage Page Grounding Methods Preventing Electrostatic DamageComputer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyIndex Tower conversion
Related manuals
Manual 232 pages 63.47 Kb
Top Page Image Contents