HP Pro 6305 manual

Page 76

2.Disconnect the drive cables from the rear of the drive, or, if you are removing a media card reader, disconnect the USB cable from the system board as indicated in the following illustration.

Figure 3-27Disconnecting the Media Card Reader USB Cable

3.Press down on the green drive retainer button located on the left side of the drive to disengage the drive from the drive cage (1). While pressing the drive retainer button, slide the drive back until it stops, then lift it up and out of the drive cage (2).

Figure 3-28Removing a 3.5-inch Drive (Media Card Reader Shown)

68 Chapter 3 Small Form Factor (SFF) Hardware Upgrades

Image 76

Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Small Form Factor SFF Hardware Upgrades Preventing Electrostatic Damage Grounding Methods Viii Product Features Standard Configuration FeaturesMicrotower MT Front Panel Components 1Front Panel ComponentsSmall Form Factor SFF Front Panel Components 2Front Panel ComponentsMicrotower MT Rear Panel Components 3Rear Panel ComponentsSmall Form Factor SFF Rear Panel Components 4Rear Panel ComponentsMedia Card Reader Components 5Media Card Reader Components6Keyboard Features KeyboardUsing the Windows Logo Key 7Windows Logo Key FunctionsAny number key Serial Number Location 8Microtower Serial Number and Product ID LocationMicrotower MT Hardware Upgrades Serviceability FeaturesRemoving the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel Removing Bezel Blanks Replacing the Front BezelSystem Board Connections 1System Board ConnectionsDIMMs Installing Additional MemoryDDR3-SDRAM DIMMs Installing DIMMs Populating Dimm SocketsPage Removing or Installing an Expansion Card Page Page Page Drive Positions 2Drive PositionsInstalling and Removing Drives Media16Extra Guide Screw Locations Removing a 5.25-inch or 3.5-inch Drive from a Drive Bay 19Removing the Drives Microtower MT Hardware Upgrades Installing a 5.25-inch or 3.5-inch Drive into a Drive Bay Page Page Removing a Hard Drive from a Drive Bay Installing a Hard Drive into an Internal Drive Bay Page Page Page Cable Lock Installing a Security LockPadlock HP Business PC Security Lock Page Page Page Front Bezel Security Page Small Form Factor SFF Hardware Upgrades Removing the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel 4Removing a Bezel Blank Changing from Desktop to Tower Configuration Black ESATA Adapter Cable Sata Installing Additional Memory Installing DIMMs 8Rotating the Drive Cage Up Installing Additional Memory Page Removing or Installing an Expansion Card Page Page Page 16Drive Positions 17Extra Guide Screw Locations Page Removing a 5.25-inch Drive from a Drive Bay Page Installing a 5.25-inch Drive into a Drive Bay 21Removing the 5.25-inch DrivePage Page Removing a 3.5-inch Drive from a Drive Bay Page Installing a 3.5-inch Drive into a Drive Bay Page Page Page Page Page 40Installing a Cable Lock HP Business PC Security Lock Page Page Page Front Bezel Security Page Battery Replacement Type Page Removing and Replacing a Removable 3.5-inch Sata Hard Drive Page Figure B-5Replacing the Hard Drive Page Page Unlocking the Smart Cover Lock Smart Cover FailSafe KeyPage Page Preventing Electrostatic Damage Grounding MethodsComputer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety Shipping PreparationIndex Tower conversion

Related manuals

Manual 232 pages 63.47 Kb