HP Pro 6305 manual

Page 39

b.If your are installing a media card reader, connect the USB cable to the USB system board connector labeled MEDIA.

Figure 2-23Connecting the Media Card Reader USB Cable

10.If installing a new drive, connect the opposite end of the data cable to the appropriate system board connector.

NOTE: If you are installing a new SATA optical drive, connect the data cable for the first optical drive to the white SATA connector on the system board labeled SATA2. Connect the data cable for a second optical drive to the black SATA connector on the system board labeled ESATA. If the ESATA connector is already populated, connect the second optical drive to the light blue connector labeled SATA1.

Refer to System Board Connections on page 16 for an illustration of the system board drive connectors.

11.Replace the front bezel and computer access panel.

12.Reconnect the power cord and any external devices, then turn on the computer.

13.Lock any security devices that were disengaged when the access panel was removed.

Installing and Removing Drives 31

Image 39

Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Small Form Factor SFF Hardware Upgrades Preventing Electrostatic Damage Grounding Methods Viii Standard Configuration Features Product Features1Front Panel Components Microtower MT Front Panel Components2Front Panel Components Small Form Factor SFF Front Panel Components3Rear Panel Components Microtower MT Rear Panel Components4Rear Panel Components Small Form Factor SFF Rear Panel Components5Media Card Reader Components Media Card Reader ComponentsKeyboard 6Keyboard Features7Windows Logo Key Functions Using the Windows Logo KeyAny number key 8Microtower Serial Number and Product ID Location Serial Number LocationServiceability Features Microtower MT Hardware UpgradesRemoving the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel Replacing the Front Bezel Removing Bezel Blanks1System Board Connections System Board ConnectionsInstalling Additional Memory DIMMsDDR3-SDRAM DIMMs Populating Dimm Sockets Installing DIMMsPage Removing or Installing an Expansion Card Page Page Page 2Drive Positions Drive PositionsMedia Installing and Removing Drives16Extra Guide Screw Locations Removing a 5.25-inch or 3.5-inch Drive from a Drive Bay 19Removing the Drives Microtower MT Hardware Upgrades Installing a 5.25-inch or 3.5-inch Drive into a Drive Bay Page Page Removing a Hard Drive from a Drive Bay Installing a Hard Drive into an Internal Drive Bay Page Page Page Installing a Security Lock Cable LockPadlock HP Business PC Security Lock Page Page Page Front Bezel Security Page Small Form Factor SFF Hardware Upgrades Removing the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel 4Removing a Bezel Blank Changing from Desktop to Tower Configuration Black ESATA Adapter Cable Sata Installing Additional Memory Installing DIMMs 8Rotating the Drive Cage Up Installing Additional Memory Page Removing or Installing an Expansion Card Page Page Page 16Drive Positions 17Extra Guide Screw Locations Page Removing a 5.25-inch Drive from a Drive Bay Page 21Removing the 5.25-inch Drive Installing a 5.25-inch Drive into a Drive BayPage Page Removing a 3.5-inch Drive from a Drive Bay Page Installing a 3.5-inch Drive into a Drive Bay Page Page Page Page Page 40Installing a Cable Lock HP Business PC Security Lock Page Page Page Front Bezel Security Page Battery Replacement Type Page Removing and Replacing a Removable 3.5-inch Sata Hard Drive Page Figure B-5Replacing the Hard Drive Page Page Smart Cover FailSafe Key Unlocking the Smart Cover LockPage Page Grounding Methods Preventing Electrostatic DamageComputer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyIndex Tower conversion

Related manuals

Manual 232 pages 63.47 Kb