HP Pro 6305 manual Removing and Replacing a Removable 3.5-inch Sata Hard Drive

Page 93

BRemoving and Replacing a Removable 3.5-inch SATA Hard Drive

Some models are equipped with a Removable SATA Hard Drive Enclosure in the 5.25-inch internal drive bay. The hard drive is housed in a carrier that can be quickly and easily removed from the drive bay. To remove and replace a drive in the carrier:

NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you can transfer the data to the new hard drive.

1.Unlock the hard drive carrier with the key provided and slide the carrier out of the enclosure.

2.Remove the screw from the rear of the carrier (1) and slide the top cover off the carrier (2). Figure B-1Removing the Carrier Cover

85

Image 93

Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Small Form Factor SFF Hardware Upgrades Preventing Electrostatic Damage Grounding Methods Viii Standard Configuration Features Product Features1Front Panel Components Microtower MT Front Panel Components2Front Panel Components Small Form Factor SFF Front Panel Components3Rear Panel Components Microtower MT Rear Panel Components4Rear Panel Components Small Form Factor SFF Rear Panel Components5Media Card Reader Components Media Card Reader ComponentsKeyboard 6Keyboard Features7Windows Logo Key Functions Using the Windows Logo KeyAny number key 8Microtower Serial Number and Product ID Location Serial Number LocationServiceability Features Microtower MT Hardware UpgradesRemoving the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel Replacing the Front Bezel Removing Bezel Blanks1System Board Connections System Board ConnectionsInstalling Additional Memory DIMMsDDR3-SDRAM DIMMs Populating Dimm Sockets Installing DIMMsPage Removing or Installing an Expansion Card Page Page Page 2Drive Positions Drive PositionsMedia Installing and Removing Drives16Extra Guide Screw Locations Removing a 5.25-inch or 3.5-inch Drive from a Drive Bay 19Removing the Drives Microtower MT Hardware Upgrades Installing a 5.25-inch or 3.5-inch Drive into a Drive Bay Page Page Removing a Hard Drive from a Drive Bay Installing a Hard Drive into an Internal Drive Bay Page Page Page Installing a Security Lock Cable LockPadlock HP Business PC Security Lock Page Page Page Front Bezel Security Page Small Form Factor SFF Hardware Upgrades Removing the Computer Access Panel Replacing the Computer Access Panel Removing the Front Bezel 4Removing a Bezel Blank Changing from Desktop to Tower Configuration Black ESATA Adapter Cable Sata Installing Additional Memory Installing DIMMs 8Rotating the Drive Cage Up Installing Additional Memory Page Removing or Installing an Expansion Card Page Page Page 16Drive Positions 17Extra Guide Screw Locations Page Removing a 5.25-inch Drive from a Drive Bay Page 21Removing the 5.25-inch Drive Installing a 5.25-inch Drive into a Drive BayPage Page Removing a 3.5-inch Drive from a Drive Bay Page Installing a 3.5-inch Drive into a Drive Bay Page Page Page Page Page 40Installing a Cable Lock HP Business PC Security Lock Page Page Page Front Bezel Security Page Battery Replacement Type Page Removing and Replacing a Removable 3.5-inch Sata Hard Drive Page Figure B-5Replacing the Hard Drive Page Page Smart Cover FailSafe Key Unlocking the Smart Cover LockPage Page Grounding Methods Preventing Electrostatic DamageComputer Operating Guidelines and Routine Care Cleaning Optical Drive PrecautionsSafety Shipping PreparationIndex Tower conversion

Related manuals

Manual 232 pages 63.47 Kb