HP dx2480 manual Hardware Upgrades, Serviceability Features

2

Hardware Upgrades

Serviceability Features

The Microtower computer includes features that make it easy to upgrade and service. A Torx T-15 screwdriver is needed for many of the installation procedures described in this chapter.

Warnings and Cautions

!

!

!

Before performing upgrades be sure to carefully read all of the applicable

instructions, cautions, and warnings in this guide.

WARNING: To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure to disconnect the power cord from the wall outlet and allow the internal system components to cool before touching.

WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telecommunications/telephone connectors into the network interface controller (NIC) receptacles.

WARNING: To reduce the risk of electrical shock, before removing the computer cover ensure that telecommunication/telephone connector (TNV circuit) are disconnected

CAUTION: Static electricity can damage the electrical components of the computer or optional equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. See Chapter 5, "Electrostatic Discharge" for more information.

CAUTION: Before removing the computer cover, ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet.

CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger (e.g., 24 AWG) UL Listed or CSA Certified Telecommunication Line Cord

Hardware Reference Guide www.hp.com/in 2-1