HP dx2480 manual Computer Setup F10 Utility, Computer Setup F10 Utilities

Page 51

7

Computer Setup (F10) Utility

Computer Setup (F10) Utilities

nUse Computer Setup (F10) Utility to do the following;

nChange factory default settings.

nSet the system date and time.

nSet,view,change,or verify the system configuration,including settings for processor, graphics, memory, audio, storage, communications,and input devices.

nModify the boot order of bootable devices such as hard drives, optical drives,orUSB flash media devices.

nEnable or disable Quick Power-On Self Test,which is faster than a full boot but does not run all of the diagnostic tests run during a full boot.

nEnter the Asset Tag or property identification number assigned by the company to this computer.

nEstablish a supervisor password that controls access to Computer Setup (F10) Utility and the settings described in this section.

nTo secure integrated I/O functionality,including the serial,USB,or parallel ports,audio,or embedded NIC,so that they cannot be used until they are unsecured.

nEnable or disble removable media boot ability.

nEnable or disable legacy diskette write ability(when supported by hardware).

Computer Setup (F10) Utility Guide

www.hp.com/in

7-1

Image 51

Contents Hardware Reference Manual Hardware Reference Guide Hardware Reference Guide Contents Security Lock Provisions Standard Configuration Features Product FeaturesFront Panel Components Front Panel ComponentsRear Panel Components Rear Panel ComponentsKeyboard Components KeyboardSpecial Mouse Functions Windows Logo KeySerial Number Location Serviceability Features Hardware UpgradesRemoving the Computer Access Panel Removing the Front Bezel Installing Additional Memory DIMMsDDR2-SDRAM DIMMs Populating Dimm Sockets Installing DIMMs Installing a Dimm Removing a 5.25 Drive Bezel Blank Replacing or Upgrading a Drive Drive Positions Locating Drive PositionsRemoving a Drive Hard disk is inserted or slide out from the back Replacing a Drive Sliding the Drives into the Drive Cage Sliding the Hard Drive into the Drive Cage Install Second Hard Disk Hardware Upgrades Hardware Upgrades Removing or Installing an Expansion Card Releasing the Slot Cover Lock Removing an Expansion Slot Cover Removing an Expansion Card Replacing or Adding an Expansion Card Securing the Expansion Cards and Slot Covers Reassembling the Computer Turn on the computer by pressing the power button Battery Replacement Hardware Reference Guide Power Supply Notice Power Supply Label Installing a Security Lock Chassis Intrusion SwitchMechanical Lock Grounding Methods Preventing Electrostatic DamageHardware Reference Guide Computer Operating Guidelines and Routine Care Operation Optical Drive PrecautionsCleaning SafetyShipping Preparation Computer Setup F10 Utility Guide Computer Setup F10 Utility Guide Contents Contents Computer Setup F10 Utilities Computer Setup F10 UtilityUsing Computer Setup F10 Utilities Computer Setup F10 Utility Heading Option Description Computer SetupCHS 1MB 3BC/IRQ7 Computer Setup Heading Option Description Troubleshooting Guide Troubleshooting Guide HP Insight Diagnostics Computer Diagnostic FeaturesAccessing HP Insight Diagnostics Survey Tab Unattended Test TabStatus Tab Log Tab Saving and Printing Information in HP Insight DiagnosticsDownloading the Latest Version of HP Insight Diagnostics Safety and Comfort Before You Call for Technical Support TroubleshootingTroubleshooting Helpful Hints Run the Restore Plus! DVDTroubleshooting Problem Cause Solution Solving General ProblemsTo permit required airflow Cable connections are Problem Cause Solution Solving Hardware Installation Problems Problem Cause Interpreting Diagnostic Lights and Audible CodesDiagnostic Front Panel LEDs and Audible Codes Diagnostic Front Panel LEDs and Audible Codes Contacting Customer Support Restoring the Software