HP dx2480 manual 1MB

Computer Setup (F10) Utility

Computer Setup (Continued)

Heading	Option	Description
Advanced BIOS	Quick Power On Self Test	Disables/enables the system to skip
Features		certain tests while booting.
		Enabling this feature decreases the time
		required to boot the system.
	Hard Disk Boot Priority	Allows you to specify the order of hard
		drive devices. The first drive in the
		order has priority in boot sequence and
		is recognized as drive C
		(if any device attached).

Advanced Chipset Features

CDROM Boot Priority	Allows you to change the ODD order
First Boot Device	Allows you to specify which devices will
Second Boot Device	boot first, second, and third, or to
Third Boot Device	disable
Boot Other Device	Disables/enables boot other device.
APIC Mode	Disables/enables the APIC mode.
Security Option	Setup
	System
F7 (Diagnostic) Support	Allows to Enable / Disable the BIOS
	diagnostic tool
F11 Prompt	Allows to Enable/disable the ability to
	F11 support ( Recovery option).

PEG/onchip VGA controller This allows you to set the first initiation the monitor display:

•Onchip VGA

•PEG Port

•Auto(default)

On-chip Frame	Allow you to ser On-Chip Frame Buffer
	size to
Buffer Size	•	1MB
	•	8MB
DVMT Mode	Allows you to set DVMT Mode to:
	•	Fixed
	•	DVMT

Support for specific Computer Setup options may vary depending on the hardware

configuration

Computer Setup (F10) Utility Guide www.hp.com/in 7-6