In addition, the computer supports:
●
●
●SODIMMs constructed with x8 and x16 devices; SODIMMs constructed with x4 SDRAM are not supported
NOTE: The system will not operate properly if you install unsupported SODIMMs.
There are two memory sockets on the system board located behind the memory access panel. To remove or install memory modules:
To remove a memory module:
1.Prepare the computer for disassembly (see Preparing to Disassemble the Computer on page 37).
2.Remove the rear cover (see Rear Cover on page 38).
3.Remove the memory cover (see Memory Cover on page 43).
4.To remove a memory module, pull outward on the latch on each side of the SODIMM (1), allow the module to lift up to about a
The computer automatically recognizes the additional memory when you turn on the computer.
46 Chapter 7 Removal and Replacement Procedures