Printer Setup, Automatic Data Logging | York 00497VIP specification

Printers

DipSW 2-1= on	Printing Columns - 40
2-2 = on	User Font Back-up - on
2-3 = on	Character Select - normal
2-4 = off	Zero - slash
2-5 = on	International character set -
	American
2-6 = on	International character set -
	American
2-7 = on	International character set -
	American
2-8 = off	International character set -
	American
DipSW 3-1= on	Data length - 8 bits
3-2 = on	Parity Setting - no
3-3 = on	Parity condition - odd
3-4 = on	Busy control - H/W busy
3-5 = on	Baud rate select - 1200*
3-6 = off	Baud rate select - 1200*
3-7 = on	Baud rate select - 1200*
3-8 = off	Baud rate select - 1200*

*Settings shown for 1200 Baud. Other Baud rates can be selected. Refer to Printer manufacturer’s manual supplied with Printer.

OPTIVIEW REMOTE CONTROL CENTER SETUP

Number of Units Connected

Using the Setpoints Screen, enter the number of chiller units to communicate with. The identification number of the chiller unit which is setup at the unit’s control panel can not exceed this number. The identification number will appear at the top of each report.

Printer Setup

Using the PRINTER Screen, the OptiView Remote Control Center must be configured to transmit data in the same format as the Printer is configured to receive the data. The following values must be entered.

•Baud Rate - Set as desired. Value selected must be the same as Printer configuration above.

•Data Bits - 8

•Parity - None

•Stop Bits - 1

Printer Type

Using the PRINTER Screen, the actual Printer type connected to the OptiView Remote Control Center must be entered. Selection determines the control codes that are sent to the Printer. These codes determine such things as lines per inch, character width and general formatting. Available selections are: Okidata, Weigh-Tronix and Seiko.

Automatic Data Logging

If automatic data logging is desired, a Status Report can be automatically printed at a specified interval beginning at a specified time, using the PRINTER Screen. The interval is programmable over the range of 1 minute to 1440 minutes in 1 minute increments. The first print will occur at the programmed START time and occur at the programmed OUTPUT INTERVAL thereafter. The time remaining until the next print is displayed on the PRINTER Screen.

•Automatic Printer Logging - Enables and disables automatic data logging

•Log Start Time - Enter the time the first print is desired.

•Log Unit Selected - Select a unit or all units to print logs of.

•Output Interval - Enter the desired interval between prints.

Print

Pressing the Print button from the Unit Screen allows the operator to obtain a printout of current system operating parameters for the currently selected unit. A sample operating data printout for a YCAS chiller is shown following.

62	YORK INTERNATIONAL

00497VIP specifications

York 00497VIP is an innovative system designed to enhance efficiency and comfort in residential and light commercial environments. Central to its appeal is its commitment to energy efficiency and environmentally friendly operation, making it a popular choice for those looking to reduce their carbon footprint.

One of the standout features of the York 00497VIP is its advanced variable speed compressor technology. This technology allows the system to adjust its cooling and heating output based on real-time demand, leading to significant energy savings. Unlike traditional systems that often operate at a single speed, the variable speed compressor modulates its output to maintain a consistent indoor climate, ensuring optimal comfort while minimizing energy consumption.

The system is equipped with a high-efficiency air handler that enhances airflow, ensuring that every corner of the space benefits from consistent temperature control. Its unique design facilitates quiet operation, making it ideal for residential spaces where noise levels need to be kept to a minimum. This whisper-quiet functioning doesn’t compromise power, as the air handler is designed to work collaboratively with the compressor to deliver efficient cooling or heating throughout the home.

York has integrated smart technology into the 00497VIP, allowing homeowners to control the system remotely via smartphone applications. This feature not only adds convenience but also enables users to monitor energy usage and adjust settings from anywhere, enhancing the possibility of energy savings.

The system also boasts advanced filtration capabilities, utilizing a multi-stage filtration system to capture dust, allergens, and other airborne particles. This technology improves indoor air quality, promoting a healthier living environment.

In terms of adaptability, the York 00497VIP is compatible with a range of smart home systems, seamlessly integrating into existing setups. This flexibility extends to its installation, as it can be tailored to fit various spaces without significant modifications to the existing infrastructure.

Built to withstand diverse environmental conditions, the York 00497VIP is constructed with durable materials, ensuring longevity and reliable performance. This combination of efficiency, smart features, and adaptability makes it an ideal choice for consumers seeking a sustainable and effective heating and cooling solution for their home or light commercial space.