Setting Up the Monitor
6.Remove the pedestal.
7.Replace the hinge cover on the pedestal.
8.Save the screws, back cover, pedestal, and base for future use.
9.Mount the monitor to a swing arm or other mounting fixture.
When the back cover has been removed, four threaded mounting holes are exposed on the monitor panel. These mounting holes are spaced 100 mm apart and are compliant with the Video Electronics Standards Association (VESA) standard for mounting flat panel monitors.
Use the four holes to attach a swing arm or other mounting fixture. Follow the instructions included with the mounting fixture, to insure that the monitor is safely attached.
User’s Guide |