HP FC1242SR, FC1142SR manual Performance specifications, Environmental specifications

Page 10

Performance specifications

The FC1142SR HBA and the FC1242SR DC HBA are 4 Gb/s Fibre Channel PCIe HBAs. The HBAs’ Fibre Channel controller incorporates a multifunction native PCIe core that is compliant to the PCIe Base Specification 1.0a and PCI e CEM Specification 1.0a. The supported physical PCIe connector is x4, x8 or x16.

These HBAs have the following performance features:

Auto-negotiation between 1, 2, or 4Gb/s link attachments

High-performance Fibre Channel host bus adapter

Full support for all Fibre Channel topologies: point-to-point, arbitrated loop, and fabric

Full support for Fibre Channel Service Class 2 and Service Class 3

Compliance with the PCIe Base and CEM 1.0a specifications:

x1 or x4 lane link interface (auto negotiated with system) at 2.5 Gb/s

Support for VC0 (1 Virtual Channel) and TC0 (1 Traffic Class)

Configuration, I/O, memory, read/write, completion, and message support

Support for 64-bit addressing

ECRC for all transmitted PCIe data packets

Link CRC on all PCIe packets and message information

Support for large payload size (2048 bytes for read/write)

Support for large read request size (4096 bytes)

Internal high-speed static RAM (SRAM)

Error correcting code (ECC) protection of local memory, including single-bit correction and double-bit protection

Small form factor (SFF) multimode optic with LC connector

Parts and construction compliant to the European Union Directive of Restriction of Hazardous Substances (RoHS)

Environmental specifications

Table 2 lists the environmental specifications.

Table 2 HBA environmental specifications

Environmental feature

Minimum

Maximum

 

 

 

Operating temperature

0°C/32°F

55°C/131°F

 

 

 

Storage temperature

–20°C/-4°F

70°C/158°F

 

 

 

Relative humidity (non-condensing)

10%

90%

 

 

 

Storage humidity (non-condensing)

5%

95%

 

 

 

10 HBA features

Image 10
Contents Part number AA-RWEQA-TE First edition December Page Contents Index Figures Intended audience About this guideRelated documentation Document conventions and symbols Document conventions Convention ElementHP technical support Subscription serviceHelpful web sites Page HBA features Performance specifications Environmental specificationsPhysical specifications CPUHBA features Installing the HBAs Installation prerequisites, Installation procedure,Installation procedure Installation prerequisitesLED indicators Installing the Windows drivers Click Software and drivers Installing the Linux drivers Installing the driver kit, Using the fibreutils RPM,Installing the RPM Installing the driver kitUsing the RPM to install drivers Uninstalling the RPMChanging driver parameters Using the fibreutils RPMLoading and unloading the qla2300 driver manually Installing the Linux drivers Troubleshooting System configuration checklist Troubleshooting checklistsHardware checklist Fibre Channel checklistUsing the Event Viewer Linux driver eventsTroubleshooting Configuring the HBAs Adapter Settings Configuration SettingsRunning Fast!UTIL Selectable Boot Settings Advanced Adapter Settings Restore Default Settings Raw Nvram DataLoopback Data Test Scan Fibre Channel DevicesFibre Disk Utility Select Host AdapterRegulatory compliance and safety Laser deviceEuropean Union notice International notices and statementsCanadian notice avis Canadien Bsmi noticeJapanese notice Korean notice Safety Electrostatic dischargeIndex Bsmi