HP QR516B manual ESX/ESXi 4.0 GA 4.0 Ux, To remove the above Alua custom Satp rule

ESX/ESXi 4.0 GA - 4.0 Ux

NOTE:

•Though ESX 4.0 GA - 4.0 Ux supports custom SATP rules, the -Poptions for setting PSP (path policy) within the custom rule are not supported. PSP must be defined within the default SATP rules.

•ESX 4.0 GA - 4.0 Ux has a known issue wherein no attempt should be made to change iops from its default value of 1000 (iops = 1000). If the iops value is changed, upon the next host reboot, an invalid value for iops is picked up and iops are then unpredictable.

•If the custom rule is not created for ALUA, 3PARdata VV’s are claimed by the

VMW_SATP_DEFAULT_AA SATP rule even though the array persona is 11/VMware (ALUA compliant array port presentation).

HP 3PAR SATP rules for use with persona 6/Generic-legacy (Active-Active array port presentation)

A “custom” SATP rule is not used. The PSP (path policy) is changed on the default active-active SATP rule. The default multipath policy for VMW_SATP_DEFAULT_AA is VMW_PSP_FIXED (Fixed path). The default is changed to the preferred PSP (path policy) of round-robin.

#esxcli nmp satp setdefaultpsp -s VMW_SATP_DEFAULT_AA -P VMW_PSP_RR

HP 3PAR SATP rules for use with persona 11/VMware (ALUA compliant array port presentation)

#esxcli nmp satp setdefaultpsp -s VMW_SATP_ALUA -P VMW_PSP_RR

#esxcli nmp satp addrule -s "VMW_SATP_ALUA" -c "tpgs_on" -V "3PARdata" -M "VV" -e "HP 3PAR Custom iSCSI/FC/FCoE ALUA Rule"

To remove the above ALUA custom SATP rule:

#esxcli nmp satp deleterule -s "VMW_SATP_ALUA" -c "tpgs_on" -V "3PARdata" -M "VV" -e "HP 3PAR Custom iSCSI/FC/FCoE ALUA Rule"

42 Configuring the Host for a Fibre Channel Connection