If the indicated problem is with the print cartridges...
✦Look at the
✦Make sure that all tape has been removed from the
✦Make sure that all print cartridges are snapped fully forward in the carriage. If they are not properly installed, the front panel will display an error message instructing you to remove and check a cartridge. After you fix this problem, close the lid and press either the Black/ White or Color Start button. (Refer to “Load the Print Cartridges” in Chapter 1.)
If the indicated problem is with the loaded paper...
✦Push the
✦Make sure that the
If your copier has a paper jam, make sure that...
✦The lid is closed.
✦The
✦The proper size paper is being used.
✦Paper is loaded fully forward in the tray.
If you see the message Turn Power off and then on again, do so. If you see the message Error #### (Error followed by a number), write down the error number and call for service.