Repetitive patterns are visible on the copy
Possible Causes | Solutions |
|
|
The original is of poor quality. | Moiré patterns, such as bands, checks or stripes in the picture after it |
| is copied, are caused by copying a picture of poor quality, such as a |
| newspaper photo. To reduce moiré patterns, try placing the picture at |
| an angle on the glass. Or try placing one or more clear plastic sheet |
| protectors directly on the glass, and then place the original face down |
| on top of the plastic sheet. You can also try reducing the copy by 3%. |
| To reduce or enlarge copies in 1% increments, press and hold down |
| the Reduce/Enlarge button and then press the Plus (+) and Minus |
| buttons. To confirm the setting, press Select/Resume. |
|
|
The incorrect paper type is selected. | If you are using special papers, such as glossy, premium, or |
| transparencies, make sure the Paper Type you selected reflects the type |
| of paper in the bottom tray. Press the Paper Type button until the |
| correct paper type appears in the display and press Select/Resume. |
|
|
The nozzles in the print cartridge might be clogged. | Print a self test page by pressing the Menu button until Self Test Page |
| appears on the display. Press the Select/Resume button to print the |
| self test page. |
| If any of the colored bars are missing (cyan, magenta, yellow, or |
| black), the appropriate print cartridge must be replaced. If streaks or |
| white lines appear in any of the colored bars, the cartridges need to |
| be cleared. |
| Follow the cartridge clearing instructions later in this chapter. |
|
|
Image density and paper quality contribute to banding. | Banding can sometimes be improved by setting Best quality on the |
Banding might also indicate that the print cartridge | front panel. |
ink is getting low. |
|
|
|