HP B.06.X manual For HP-UX 11i v1 or 11i v2 Installing from the HP, Software Depot, Swinstall -s

Installing and Configuring PPU Software

Installing PPU Software

		For HP-UX 11i v1 or 11i v2 - Installing from the HP
		Software Depot
Step	1.	Do a search for the PPU product T2351AA at HP’s Software Depot web
		site: software.hp.com
Step	2.	Click on the pay per use software (% utilization) link that appears as a
		result of your search
Step	3.	Read the “overview” page, then click on the installation link (near the
		bottom).
Step	4.	Read the “installation” page, then click on the Receive for Free button.
Step	5.	Fill in the registration information, click on the HP-UX 11.11 or HP-UX
		11.23 operating system link, and then click on the Next button.
Step	6.	Click on the appropriate link, under the “download software” table title,
		and download the depot file to the following directory: /var/tmp
		Note that you can name the download anything but by default it is
		(substitute “11.11” for HP-UX 11i v1 systems):
		/var/tmp/T2351AA_B.06.04_HP-UX_B.11.23_32+64.depot
Step	7.	On the PPU system log in as root.
Step	8.	Install the appropriate PPU bundle:
		swinstall -s \
		/var/tmp/T2351AA_B.06.04_HP-UX_B.11.23_32+64.depot’*’
		The interactive swinstall can also be used to install the depot file by
		setting the target to /var/tmp/<package_name>. The PPU B.06.x
		software is low overhead and non-intrusive. The file-system size is
		increased by approximately 5MB and a reboot is not required.
Step	9.	Continue with “Configuring PPU Software” on page 29.

28 Chapter 3