HP C4390 manual Manage your network settings, Change basic network settings from the control panel

Page 13

To change a USB connection to an integrated wireless WLAN 802.11 connection

1.Unplug the USB connection from the back of the HP All-in-One.

2.Insert the HP All-in-One CD in the computer CD-ROM drive.

3.Follow the onscreen instructions for a wireless network installation.

4.When the installation is complete, open Printers and Faxes (or Printers) in the Control Panel and delete the printers for the USB installation.

For more detailed instructions on connecting the HP All-in-One to a network, see:

•“Integrated wireless WLAN 802.11 network setup” on page 5

•“Wireless ad hoc network setup” on page 7

Manage your network settings

You can manage network settings for the HP All-in-One through the HP All-in-One control panel.

Change basic network settings from the control panel

The HP All-in-One control panel enables you to perform a variety of network management tasks. This includes printing the network settings, restoring the network defaults, turning the wireless radio on and off, and printing a wireless network test.

Print network settings

You can print a network configuration page to see network settings such as the IP address, communication mode, and network name (SSID).

1.Press the Wireless button on the front of the HP All-in-One.

2.Press the button next to the icon on the display until Print Network Configuration Page is highlighted, and then press the button next to OK.

Restore network defaults

You can reset the network settings to what they were when you purchased the HP All-in- One.

1.Press the Wireless button on the front of the HP All-in-One.

2.Press the button next to the icon on the display until Restore Network Defaults is highlighted, and then press the button next to OK.

3.Confirm that you want to restore the network defaults.

Turn the wireless radio on and off

The wireless radio is off by default, but when you install the software and connect the HP All-in-One to the network, the wireless radio is turned on automatically. The blue light on the front of the HP All-in-One indicates that the wireless radio is on. In order to stay connected to a wireless network, the radio must stay on. However, if the HP All-in-One is connected directly to a computer with a USB connection, the radio is not used. In this case you might want to turn the radio off.

1.Press the Wireless button on the front of the HP All-in-One.

2.Press the button next to the icon on the display until Turn Radio On or Turn Radio Off is highlighted, and then press the button next to OK.

Network setup

Manage your network settings

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents HP Photosmart C4380 All-in-One series Hewlett-Packard Company notices Contents HP All-in-One at a glance HP All-in-One overviewHP All-in-One overview Control panel buttonsFind more information Setup GuideOnscreen Help Integrated wireless Wlan 802.11 network setup Network setupConnect to an integrated wireless Wlan 802.11 network What you need for an integrated wireless Wlan 802.11 networkTo connect the HP All-in-One Wireless ad hoc network setupCreate a network profile for a Windows XP computer What you need for an ad hoc networkCommunication mode Ad Hoc Encryption enabled Connect to a wireless ad hoc networkCreate a network profile for other operating systems Connect to additional computers on a network Change basic network settings from the control panel Manage your network settingsPrint network settings Restore network defaultsWireless Network Test prints Print the wireless network testLoad originals and load paper Use the HP All-in-One featuresTo load an original on the scanner glass To load full-size paperUse HP All -in One features To load 10 x 15 cm 4 x 6 inch photo paper in the input tray Avoid paper jamsTo print one or more 10 x 15 cm 4 x 6 inch photos Print 10 x 15 cm 4 x 6 inch photosMake a copy Scan an image or documentTo scan to a computer To make a copy from the control panel Replace the print cartridgesPress Start Copy Black or Start Copy Color to begin copying To replace the print cartridgesReplace the print cartridges Clean the glass Clean the HP All-in-OneTo clean the glass Clean the lid backingTo clean the lid backing Uninstall and reinstall the software Troubleshooting and supportHardware setup troubleshooting HP All-in-One will not turn onSolution HP All-in-One does not print Weak signal Wireless setup troubleshootingInvalid WEP key during wireless setup Cannot connect to network during setupInvalid passphrase during wireless setup Printer Not Found screen appears during installationTo clear a paper jam from the rear door Clear paper jamsTo clear a paper jam from the front door Print cartridge troubleshooting Support process If you have a problem, follow these stepsTechnical information Product specificationsSystem requirements Print cartridge yield Regulatory noticesRegulatory model identification number Warranty $UJHQWLQD
Related manuals
Manual 179 pages 11.4 Kb Manual 16 pages 38.4 Kb
Top Page Image Contents