HP C4385, C4380, C4390 manual HP All-in-One does not print

Page 26

Chapter 4

computer and the other into the back of the HP All-in-One. You can connect to any USB port on the back of your computer.

Troubleshooting and support

For more information on installing the software and connecting the USB cable, see the Setup Guide that came with the HP All-in-One.

The HP All-in-One does not print

Solution: If the HP All-in-One and computer are not communicating with each other, try the following:

•Look at the On light located on the front of the HP All-in-One. If it is not lit, the HP All-in- One is turned off. Make sure the power cord is firmly connected to the HP All-in-One and plugged into a power outlet. Press the On button to turn on the HP All-in-One.

•Make sure the print cartridges are installed.

•Make sure you have paper loaded in the input tray.

•Check that the HP All-in-One does not have a paper jam.

•Check that the print carriage is not jammed.

Open the print cartridge door to access the print carriage area. Remove any objects that are blocking the print carriage, including any packing materials. Turn the HP All-in-One off and then turn it on again.

•Check that the HP All-in-One print queue is not paused (Windows) or stopped (Mac). If it is, choose the appropriate setting to resume printing. For more information about accessing the print queue, see the documentation that came with the operating system installed on your computer.

•Check the USB cable. If you are using an older cable, it might not be working properly. Try connecting it to another product to see if the USB cable works. If you experience problems, the USB cable might need to be replaced. Also verify that the cable does not exceed 3 meters (9.8 feet) in length.

•Make sure your computer is USB ready. Some operating systems, such as Windows 95 and Windows NT, do not support USB connections. Check the documentation that came with your operating system for more information.

•Check the connection from the HP All-in-One to your computer. Verify that the USB cable is securely plugged into the USB port on the back of the HP All-in-One. Make sure the other end of the USB cable is plugged into a USB port on your computer. After the cable is connected properly, turn the HP All-in-One off and then on again.

•If you are connecting the HP All-in-One through a USB hub, make sure the hub is turned on. If the hub is on, try connecting directly to your computer.

24 Troubleshooting and support

Page 25 Page 27
Image 26
Page 25 Page 27
Contents HP Photosmart C4380 All-in-One series Hewlett-Packard Company notices Contents HP All-in-One overview HP All-in-One at a glanceControl panel buttons HP All-in-One overviewOnscreen Help Setup GuideFind more information Network setup Integrated wireless Wlan 802.11 network setupWhat you need for an integrated wireless Wlan 802.11 network Connect to an integrated wireless Wlan 802.11 networkWireless ad hoc network setup To connect the HP All-in-OneWhat you need for an ad hoc network Create a network profile for a Windows XP computerCreate a network profile for other operating systems Connect to a wireless ad hoc networkCommunication mode Ad Hoc Encryption enabled Connect to additional computers on a network Print network settings Manage your network settingsChange basic network settings from the control panel Restore network defaultsPrint the wireless network test Wireless Network Test printsTo load an original on the scanner glass Use the HP All-in-One featuresLoad originals and load paper To load full-size paperUse HP All -in One features Avoid paper jams To load 10 x 15 cm 4 x 6 inch photo paper in the input trayPrint 10 x 15 cm 4 x 6 inch photos To print one or more 10 x 15 cm 4 x 6 inch photosTo scan to a computer Scan an image or documentMake a copy Press Start Copy Black or Start Copy Color to begin copying Replace the print cartridgesTo make a copy from the control panel To replace the print cartridgesReplace the print cartridges Clean the HP All-in-One Clean the glassTo clean the lid backing Clean the lid backingTo clean the glass Hardware setup troubleshooting Troubleshooting and supportUninstall and reinstall the software HP All-in-One will not turn onSolution HP All-in-One does not print Wireless setup troubleshooting Weak signalInvalid passphrase during wireless setup Cannot connect to network during setupInvalid WEP key during wireless setup Printer Not Found screen appears during installationTo clear a paper jam from the front door Clear paper jamsTo clear a paper jam from the rear door Print cartridge troubleshooting If you have a problem, follow these steps Support processSystem requirements Product specificationsTechnical information Print cartridge yield Regulatory noticesRegulatory model identification number Warranty $UJHQWLQD
Related manuals
Manual 179 pages 11.4 Kb Manual 16 pages 38.4 Kb
Top Page Image Contents