To load an original on the glass
1.Lift the lid on the HP
2.Load your original print side down in the right front corner of the glass.
Tip For more help on loading an original, refer to the engraved guides along the edge of the glass.
3.Close the lid.
To load 10 x 15 cm ( 4 x 6 inch) photo paper in the input tray
1.Remove all paper from the input tray.
2.Insert the stack of photo paper into the
If the photo paper you are using has perforated tabs, load the photo paper so that the tabs are closest to you.
Tip For more help on loading
3.Slide the
Do not overload the input tray; make sure the stack of paper fits within the input tray and is no higher than the top of the
HP
Basics Guide | 9 |