ASSEMBLY
Before Assembly, inspect the heater thoroghly for missing parts or shipping damage. If any damage or missing parts are detected, report it to your heater dealer.
DO NOT INSTALL OR USE A DAMAGED OR INCOMPLETE HEATER
Shaker Handle Assembly:
1.First, remove the two(2) bolts from the left side of the unit where the shaker handle is to be mounted.
2.Next, spin the shaker plate (a) counteclockwise until it stops. Slide the shaker handle through the hole and on to the shaker grate. NOTE: Make sure that the shaker handle is in a 90 degree position and that the shaker grates are lying flat.
3.Rotate the shaker plate (a) clockwise until it touches the unit.Then give it another 1/2 turn or until the mounting holes coincide with the unit.
4.Attach to the unit with the bolts removed in step 1.
5.Screw one(1) of the spring handles, from the parts box, on to the shaker handle 3/4”
Feed & Ash Door Assemblies:
Feed Door-
1.Screw one(1) of the spring handles, from the parts box, on to the Feed Door handle.
(A)
Ash Door-
1.Screw one(1) of the spring handles, from the parts box, on to the Feed Door handle.
2.Insert the
3.Then screw it in into the Ash Door as shown and At- tach the Lock Nut provided to the Carriage Bolt.
Flue Collar Assembly:
1.Mount the flue collar to the top of the unit using the (3)
USSC
Side view of flue collar |
mount to heater top |
3 |