HP M1120n manual Software description

Software description

NOTE: Many of the options in the drop-down menus control the same features that are available by using the TWAIN user interface tabs and buttons.

●Scan. This drop-down menu contains the following options:

◦New Scan. Use this option to rescan the image. Flatbed previews are always at 75 dpi and in color.

◦Accept. Use this option to rescan the image if the original is on a flatbed scanner and then send the image back to a program with the specified settings.

◦Exit. Use this option to exit the HP LaserJet Scan software.

●Basic. This drop-down menu contains the following options:

◦Rotate. Use this option to rotate the scanned image 90° to the left or 90° to the right.

◦Zoom. Use this option to zoom in or out on the selected area of the scan. This automatically starts a rescan if one is needed to obtain a clear image.

◦Resize. Use this option to change the selection area for final scan. The final scan is performed within this selection area.

◦Lighten/Darken. Use this option to lighten or darken the scanned image.

◦Reset Tools. Use this option to reset all the controls to their default values.

●Advanced. This drop-down menu contains the following options:

◦Resolution. Use this option to designate the final resolution for the image. The software interpolates resolutions that are above 1200 dpi.

◦B/W Threshold. Use this option to adjust the black and white threshold, and to specify which color channel is used for the scan.

◦Mirror. Use this option to flip the scanned image horizontally.

◦Invert Colors. Use this option to invert the colors in the scanned image.

◦Color Adjustment. Use option tab to adjust the color on the scanned image.

●Output Type. This drop-down menu contains the following options:

◦Millions of Colors (default)

◦256 Colors (8 bit)

◦256 Colors (web palette)

◦256 Colors (system palette)

◦256 Gray Shades

◦Black White (1 bit)

34 Chapter 2 Software description ENWW