CONGRATULATIONS!
You've purchased one of America's Finest Wood and Coal Burning Furnaces. By heating with wood and coal you're helping to CONSERVE AMERICA'S ENERGY! Wood is our Renewable Energy Resource. Please do your part to preserve our wood supply. Plant at least one tree each year. Future generations will thank you.
NOTE: YOUR UNIT MUST BE INSTALLED BY A QUALIFIED
FURNACE INSTALLER. IMPROPER INSTALLATION COULD
VOID YOUR WARRANTY!
TOOLS AND MATERIALS NEEDED
TOOLS | MATERIALS |
Pencil | 6" Pipe, 6" Elbow, Collar and Thimble; as required |
6 Foot Folding Rule or Tape | (24 gauge min.) |
Tin Snips | 1/2" Sheet Metal Screws |
Drill, Hand or Electric | 6" Inside Diameter Listed Residential Type or |
Drill Bit (For Sheet Metal Screws) 1/8" Dia. | Building Heating Appliance Chimney or Existing |
Screw Driver | Masonry Chimney (SEE Page 8). |
Gloves | Electrical Wiring |
Sabre Saw | 6" Draft Regulator |
5/16" Nut Driver or | 1/2" Conduit |
5/16" Socket with Rachet | (Conduit Connectors) |
| Furnace Cement (Manufacturer Recommends: |
| Rutland Black - Code 78 or Equivalent) |
| Plenum and Duct Work as Required |
2 | •DRAWINGS FOR ILLUSTRATION PURPOSES ONLY• |