United States Stove B9945L manual Removing Front Screen, LOG Assembly, LOG Positioning

Page 11

REMOVING FRONT SCREEN

1)Remove the two(2) screws and lift the front screen slightly up. (Fig. 7A) Then tilt the bottom of the screen inward and downward. (Fig. 7B) 2) Lean the top of the screen toward you slightly (Fig. 7B) and then proceed to carefully bring the screen straight back (Fig. 7C). NOTE: To reinstall the front screen, reverse steps 1 & 2.

FIG 7A

FIG 7B

FIG 7C

LOG ASSEMBLY

LOG POSITIONING

Donothandletheselogswithyourbarehands! Alwayswearglovestopreventskinirritationfromceramicfibers. After handling logs, wash your hands gently with soap and water to remove any traces of fibers.

PROPER INSTALLATION SEQUENCE:

WARNING: Failure to position the parts in accordance with these dia- grams or failure to use only parts specificallyapprovedwiththisheater may result in property damage or personalinjury.

FIGURE 8. Log Set Assembly

WARNING

Thepositioningofthelogsiscriticaltothesafeandcleanoperationofthisheater. Sooting and other problems may result if the logs are not properly and firmly situatedintheappliance.Neveraddadditionallogsorembellishmentssuchas pinecones,vermiculiteorrockwooltotheheater.

11

Image 11
Contents ~WHAT to do if YOU Smell GAS United States Stove CompanyTable of Contents Important Safety Information Features Product FeaturesContents SpecificationsCodes Items Required for InstallationItems Required for Installation Minimum Clearances InstallationMantel Clearances Gas Connection GAS ConnectionRear View of 9945 Vent-Free Gas Heater GAS Pressure CheckLOG Positioning LOG AssemblyProper Installation Sequence Removing Front ScreenWhat to do if YOU Smell GAS For Your Safety Read Before LightingFor Your Safety Operating InstructionsTurn OFF GAS to Appliance Lighting InstructionsPilot Flame Cleaning / ServicingMatch Lighting Instructions Checking Flame AppearanceFlames Flame AppearanceHeater Assembly Replacement Parts KEY Description QTY Parts List for Heater AssemblyBurner & LOG Assembly Parts List for Generator and LOG Assembly Observed Problem Possible Cause Remedy TroubleshootingObservedproblem Possiblecause Remedy Optional Kits for Optional Kits Forthe Wiring Diagram for Generator AssemblyWiring with the WTK60 Wall Thermostat KIT Standard Wiring from FactoryWiring of the RCK60 Remote Control KIT Control Valve Wiring with the WSK60 Wall Switch KITPage Limited Warranty Policy United States Stove Company Howto Order Repair Parts or Options