HP 4100mfp manual Using the ADF, General guidelines for using the ADF

Using the ADF

Using the automatic document feeder (ADF) is a fast, convenient way to feed multipage originals for copying or digital-sending. You can load the ADF with as many as 30 sheets of paper. The ADF accepts documents that meet the following specifications:

●single-sided or double-sided originals

●documents on standard letter-, A4-, and legal-size paper

●documents ranging in size from 148.5 by 210.0 mm (5.9 by 8.3 inches) to 215.9 by 355.6 mm (8.5 by 14.0 inches)

●documents ranging in weight from 60 to 135 g/m2 (16 to 36 lb)

●documents that are free of tears or perforations

●documents that are square or rectangular and in good condition (not fragile or worn)

●documents that are free of glue, correction fluid, or wet ink

Note Do not use multipart forms.

The ADF passes the original document across the scanner glass, and returns it to the upper-level tray located to the right of the ADF. Copies made using the ADF are delivered to the output bin beneath the scanner.

General guidelines for using the ADF

Before placing documents into the ADF, prepare the documents by doing the following:

●Flatten curls or wrinkles.

●Remove staples, paper clips, sticky notes, and similar materials.

20 Chapter 2 – Basic operations EN