HP 4100mfp manual Performing basic copying, Copy defaults, One-touch copying, Multiple copies

Page 7

Performing basic copying

Copy defaults

The preset default copy settings for the HP LaserJet 4100 mfp series are:

●single-copy output

●letter-sized original and letter-sized copy (in North America only; otherwise, the default is A4)

●single-sided original and single-sided copy

●mixed text, and graphic photo document content

●normal brightness

●no reduction or enlargement (100%)

●one page per sheet (1-up) copying

One-touch copying

If you wish to make a single copy using the product’s default settings, place your document in the ADF or on the scanner glass and press START.

Multiple copies

To make multiple copies, use the numeric keypad to type the desired number of copies (1 to 99), and then press START.

44 Chapter 4 – Walk-up copying

EN

Image 7

Contents Use Overview Basic operationsGeneral guidelines for using the ADF Using the ADFGeneral guidelines for using the scanner glass Using the scanner glassPrinting to the top output bin Selecting the output binPrinting to the rear output bin Walk-up copying Multiple copies Copy defaultsPerforming basic copying One-touch copyingSize select Letter, Legal, Executive, A4, A5, or B5 User-defined copy settingsUsing the Describe Original screen Content select Text, Mixed or PhotoInformation, see Duplexing a copy job on Using the Copy Settings screenDuplexing a copy job Normal modeImproving copy quality Adjusting the contrastReducing or enlarging copies Introduction Sending to e-mailDescribe Original screen Basic sending proceduresUsing the address books Sending documentsColor Black and white B/W or Color Sending a documentProblem solving Jam locations Clearing jamsOn the next Clearing jams from the top cover and toner cartridge areaTray Clearing jams from input traysTrays 2, 3, Clearing jams from the duplexer Clearing jams from the rear output slot