Configuring
RADIUS
Authentication
user = admin {
pap = cleartext "tacadmin" user = monitor {
pap = cleartext "tacmonitor" user = tacuser {
pap = cleartext "tacpass" service =
}
The secret you specify here must also be specified in the HP EFS WAN Accelerator when you set up TACACS+ server support. For detailed information, see the HP Enterprise File Services WAN Accelerator Management Console User Guide.
The tacuser is a monitor user as specified by
NOTE: The chap, opap, and arap variables can be specified in a similar manner, but only pap is needed.
8.Start the server by executing:
>/usr/local/sbin/tac_plus
Configuring RADIUS Authentication in the HP EFS WAN Accelerator
The following section provides the basic steps for configuring RADIUS authentication in the HP EFS WAN Accelerator.
The following section describes the basic steps for configuring RADIUS authentication in the HP EFS WAN Accelerator.
You prioritize RADIUS authentication methods for the system and set the authorization policy and default user.
IMPORTANT: Make sure to put the authentication methods in the order in which you want authentication to occur. If authorization fails on the first method, the next method is attempted, and so forth, until all the methods have been attempted.
9 - RADIUS AND TACACS+
AUTHENTICATION
HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR 2.1.5 DEPLOYMENT GUIDE | 101 |