HP Enterprise File Services WAN Accelerator manual To configure HP EFS, WAN Accelerator2

To configure HP EFS	1. On HP EFS WAN Accelerator2, connect to the CLI. For detailed information, see
WAN Accelerator2	the HP StorageWorks Enterprise File Services WAN Accelerator Command-Line
	Interface Reference Manual.
	2. At the system prompt, enter the following set of commands:
	SH2 >	enable
	SH2 #	configure terminal
	SH2 (config)		# in-path peering rule pass peer 10.0.1.1 rulenum 1
	SH2 (config)		# in-path peering rule pass peer 10.0.1.3 rulenum 1
	SH2 (config)		# in-path rule pass-through srcaddr 10.0.1.1/32 rulenum 1
	SH2 (config)		# in-path rule pass-through srcaddr 10.0.1.3/32 rulenum 1
	SH2 (config)		# wr mem
	SH2 (config)		# show in-path peering rules
	Rule	Type	Source Network	Dest Network	Port	Peer Addr
	-----	------	------------------ ------------------ -----			--------------
	-
	1	pass	*	*	*	10.0.1.3
	2	pass	*	*	*	10.0.1.1
	def	auto	*	*	*	*
	SH1 (config)		# show in-path rules
	Rule	Type Source Addr		Dest Addr	Port Target Addr
	Port
	-----	---- ------------------ ------------------ ----- ---------------
	-----

1	pass 10.0.1.3/32	*	*	--	--
2	pass 10.0.1.1/32	*	*	--	--
def auto *		*	*	--	--

To configure HP EFS	1. On HP EFS WAN Accelerator3, connect to the CLI. For detailed information, see
WAN Accelerator3	the HP StorageWorks Enterprise File Services WAN Accelerator Command-Line
	Interface Reference Manual.
	2. At the system prompt, enter the following set of commands:
	SH3 >	enable
	SH3 #	configure terminal
	SH3 (config)		# in-path peering rule pass peer 10.0.1.1 rulenum 1
	SH3 (config)		# in-path peering rule pass peer 10.0.1.2 rulenum 1
	SH3 (config)		# in-path rule pass-through srcaddr 10.0.1.1/32 rulenum 1
	SH3 (config)		# in-path rule pass-through srcaddr 10.0.1.2/32 rulenum 1
	SH3 (config)		# wr mem
	SH3 (config)		# show in-path peering rules
	Rule	Type	Source Network	Dest Network	Port	Peer Addr
	-----	------	------------------ ------------------ -----			--------------
	-
	1	pass	*	*	*	10.0.1.2
	2	pass	*	*	*	10.0.1.1
	def	auto	*	*	*	*
	SH1 (config)		# show in-path rules
	Rule	Type Source Addr		Dest Addr	Port Target Addr
	Port
	-----	---- ------------------ ------------------ ----- ---------------
	-----

1	pass 10.0.1.2/32	*	*	--	--
2	pass 10.0.1.1/32	*	*	--	--
def auto *		*	*	--	--
110	10 - SERIAL CLUSTER AND CASCADE DEPLOYMENTS