1.Configure the HP EFS WAN Accelerator as an in-path device. For detailed information, see the HP StorageWorks Enterprise File Services WAN Accelerator Installation and Configuration Guide.
2.Connect to the Management Console. For detailed information, see the HP Enterprise File Services WAN Accelerator Management Console User Guide.
3.Navigate to the Setup: Optimization Service - In-Path Rules page in the Management Console.
Figure 4-3.Setup: Optimization Service - In-Path Rules Page
4.To enable failover support for the out-of-path HP EFS WAN Accelerators, define a fixed-target rule that points to the main and backup targets. For example:
Type the out-of-path, server-side HP EFS WAN Accelerator IP address and port in the Target Appliance IP and Port text boxes.
32 | 4 - OUT-OF-PATH NETWORK DEPLOYMENTS |
