Framing a group of displays is similar to framing a single display except that you will use some of the straight connectors to cover the gap between adjacent displays.
Figure 3-12 Framing an array
Attach corners and straight connectors after the rails are in place.
Figure 3-13 Attaching corners and connectors
When you frame an array, the peripheral displays can no longer move independently. For this reason, the following tasks may best be done before framing:
●Color Calibration
●Attaching all cables
●Putting the main power switch in the ON () position
●Horizontal, vertical and depth adjustment of all displays
14 Chapter 3 Setting up the display | ENWW |