HP LD4730 47-inch Micro-Bezel Video Wall Display manual Ethernet

9.If you will be connecting the display to a network, plug your CAT-5 network cable into the Ethernet port (11).

Figure 3-26 Ethernet

The Ethernet cable from the display can connect to a media player/computer, a router (switch), or an Intranet. A network connection enables the use of the Video Over Ethernet software to assign a media player to drive the display. The connection also allows the HP Network Sign Manager program, running on a networked media player/computer, to send command data.

Connect the Ethernet cable (not included) using one of the following connections:

●Computer Direct Connection—Connect the LAN cable to the LAN port on the display and to the LAN port on the media player/computer (1).

●Router—Connect the LAN cable to the LAN port on the display and to a LAN port on the router (2).

●Intranet—Connect the LAN cable to the LAN port on the display and to the Intranet network via an access point (3).

20 Chapter 3 Setting up the display ENWW