HP LD4730 47-inch Micro-Bezel Video Wall Display manual 3IR Lock Message, Menu Setting Function

	Menu Setting	Function
A	Monitor ID	ID number assigned to the display in the SET MONITOR ID Dialog
B	IR Daisy Chain Monitor ID	Enter the ID number of the display you want to receive the IR
		commands or enter “00” to control all the displays simultaneously
C	Set Button	Sets the display ID of the display you want to control and will lock
		out all the other displays from receiving the commands
D	Exit Button	Exit the IR Daisy Chain dialog without setting the display ID to
		receive commands

Enter the ID number of the display in the two digit window (following figure). Entering “00” in this window will allow all the displays in the daisy chain to receive the command. This may be useful when turning the displays ON or OFF, or setting the time schedule for the video wall.

Figure 4-2Identify the display to control

Press the SET button to select the display ID number as the display you want to send commands. The LOCK message window will appear in all the other displays to indicate that they will not receive any commands from the IR remote control through the External IR Sensor (Figure 4-3 IR Lock Message on page 33). The On-Screen Display Menu will appear in the display selected. Any command, menu selection, or setting entered with the IR remote control will now be executed by the selected display.

Figure 4-3IR Lock Message

ENWW Using the On-Screen Display menu 33