HP LD4730 47-inch Micro-Bezel Video Wall Display manual OSD menu selections, Settings

Page 43

To put the display into low power mode, press the power () button. Press it again to restore full power.

The buttons can be disabled by pressing the left and right arrows buttons simultaneously and holding for 5 seconds. Repeat this procedure to enable the buttons again.

Single buttons can be disabled and enabled with the following 5–second key presses:

To enable/disable this:

Hold these buttons:

 

 

Power button

Right arrow and MENU buttons

 

 

IR remote control

Left arrow and MENU buttons

 

 

MENU button

Up and down arrows.

 

 

The LED indicates the power status:

●Green — full power

●Red — low power (the screen is dark but the controller is listening for commands)

●Off — no power

If the buttons remain untouched for 20 seconds after adjustments have been made but not saved, the current settings will be saved and the OSD menu will close. If the input source, resolution, aspect ratio or frequency changes while the OSD is active, the OSD will close without saving new settings.

OSD menu selections

The OSD menu contains six main menus:

Icon

Menu

Function description

 

 

 

 

Picture

Set or change video characteristics such as, brightness, contrast, and

 

 

resolution.

 

 

 

 

Audio

Set or change the audio options.

 

 

 

 

Option 1

Set or change display options such as video source, aspect ratio, and network

 

 

 

 

settings.

 

 

 

 

Option 2

Set or change display options such as OSD language, schedule, and ISM

 

 

method.

 

 

 

ENWW

Using the On-Screen Display menu 35

Page 42 Page 44
Image 43
Page 42 Page 44
Contents User Guide First Edition January Document Part Number About this guide Iv About this guide Table of contents Operating the display Japanese power cord requirements Viii HP Digital Signage Displays Product featuresOptional accessories AccessoriesImportant safety information Safety and maintenance guidelinesMaintenance guidelines Enww Cleaning the LD4730G Cleaning the LD4730Shipping the display Unpacking Setting up the displayComponent Function Identifying display components4Connecting to the input terminal Setting up the display Connecting the speakers sold separatelyControl Label Function Display control panelLabel Function Description Identifying remote control buttonsSetting up the remote control Mounting a single display on a stand Sold Separately Installing the HP LD4730 Frame System Sold Separately11Attaching corners Enww Securing the display Connecting cablesLINE-IN Label Function19Audio connection 22 RS-232 25 DisplayPort 26 Ethernet Enww Connecting multiple displays with Video Over Ethernet VOE Connecting multiple displays to one playerConnecting multiple displays to one player Connecting multiple displays with Tile Mode 34Multiple displays with tile mode 37Daisy chain connection RS232-C Mounting the display Considerations for wall mounting Mounting in portrait positionImage color matching file Installing the driver, .INF and .ICM filesSoftware and utilities Information fileDownloading from the Web Operating the display Using the On-Screen Display menuControlling displays with IR Daisy Chain Setting up IR Daisy Chain3IR Lock Message Menu Setting FunctionNavigating with the control panel Navigating with the infrared remote controlSettings To enable/disable this Hold these buttonsOSD menu selections Backlight ContrastBrightness Sharpness1360 x 768 pixels TemperatureAudio Volume 1280 x 768 pixelsLevel 1 Menu Level 2 Menu Level 3 Menu Description Treble Sound ModeConfiguration PhaseNSM Network SensorInterface Select Auto DetectionOption Language VOE SetupOSD Mode Level 1 Menu Level 2 Menu Level 3 Menu DescriptionKey Lock Power On DelayLevel 1 Menu Level 2 Menu Level 3 Menu Description Schedule DPM SelectSerial number Factory ResetDiagnostic InformationReset Firmware UpdateTile Mode Monitors Natural ModeUsing Tile Mode Power On DelayUsing Key Lock Setting the backlight levelH1,V1 H1,V2 H1,V3 H1,V4 H1,V5 Optimizing analog images Tuning color + + 10Rotating the filter 11Positioning the colorimeter Operating the display Enww Solving common problems TroubleshootingPower Button Using Online Technical SupportLockout Preparing to call technical support HP Digital Signage Display Technical specificationsPacked Weight HP LD4730 HP LD4730G ResolutionConnectors Other input Connector Environmental OperatingPreset display modes Recognizing preset display resolutionsHigh definition video formats Defect Type Allowable Occurrences Power indicatorMode LED indicator light Display quality and pixel policyCables Agency regulatory noticesFederal Communications Commission notice ModificationsAvis Canadien Canadian noticeEuropean Union regulatory notice Japanese power cord requirements Japanese notice Korean notice Power cord set requirementsGerman ergonomics notice Chemical substances Product environmental noticesUkraine Restriction of Hazardous Substances Turkey EEE regulation
Related manuals
Manual 35 pages 13.05 Kb

LD4730 47-inch Micro-Bezel Video Wall Display specifications

The HP LD4730 is a state-of-the-art 47-inch Micro-Bezel Video Wall Display designed to enhance visual experiences in various settings, including retail, control rooms, and corporate environments. With its ultra-narrow bezels, the LD4730 offers an immersive viewing experience by minimizing the gaps between screens, allowing for seamless video wall configurations.

One of the standout features of the HP LD4730 is its impressive Full HD resolution of 1920 x 1080 pixels, which ensures crystal-clear image quality. The display leverages advanced LED backlighting technology, delivering vibrant colors and deep blacks, making it suitable for a wide range of applications, from showcasing promotional content to displaying critical data in real-time.

The LD4730 is engineered for 24/7 operation, providing reliability and durability for continuous use in demanding environments. This makes it ideal for digital signage applications where uptime is crucial. Its robust design is complemented by a sophisticated thermal management system that ensures optimal performance while preventing overheating, thereby prolonging the lifespan of the display.

In terms of connectivity, the HP LD4730 offers multiple input options, including HDMI, DisplayPort, and DVI, allowing for easy integration with various devices and content sources. This versatility is essential for creating dynamic presentations and showcasing diverse content formats. Additionally, it supports daisy chaining, enabling users to connect multiple displays easily for larger video walls without the need for additional hardware.

The display also incorporates advanced calibration capabilities that ensure consistent brightness and color across all units in a video wall setup. This feature maintains a uniform appearance, crucial for professional environments where visual consistency is key.

For added convenience, the HP LD4730 includes a user-friendly interface, allowing for straightforward setup and configuration. The display can be easily mounted in portrait or landscape orientation, providing flexibility in design and installation.

In conclusion, the HP LD4730 47-inch Micro-Bezel Video Wall Display is a powerful solution for businesses looking to create impactful visual displays. Its high-resolution capabilities, durable design, and extensive connectivity options make it suitable for a broad array of applications, ensuring high-quality performance and reliability in any environment.
Top Page Image Contents