HP LD4730 47-inch Micro-Bezel Video Wall Display manual Power On Delay, DPM Select, Key Lock

Level 1 Menu	Level 2 Menu	Level 3 Menu	Description
		Schedule	You can schedule up to 7 On/Off times for the display to enter
			low power mode (screen is dark) or come out of low power to
			full power:
			On — Set a time for the display to turn on full power.
			Off — Set a time for display to “sleep.”
			Input — Choose the input source to play at the ON time.
			Select the frequency for this event:
			Every Day — Play this event every day at the scheduled time.
			Monday – Sunday choices: Play this event on the selected
			days.
			Every Week — If checked, the event will play on the selected
			days every week. If not checked, the event will play on the
			selected days for one week only.
		Power On Delay	Yes — To stagger the power-up of multiple displays on an
			electrical circuit, turn this option on. Each display will choose a
			delay either randomly or based on its tiling number.
			No — No delay on power up.
			The default setting is No.
	DPM Select		Display Power Management Select
			On — The display will enter low power mode when there is no
			signal on the VGA and DP inputs.
			Off — Prevents the display from entering low-power mode.
			VGA Only — Equivalent to On when Auto Detect is on. When
			Auto Detect is off, will enter low power mode when VGA is the
			selected video source and there is no signal on the VGA input,
			but will not enter low power mode when another source is
			selected.
			The default setting is VGA Only.
	Key Lock		On – Disable the buttons at the back of the display.
			Off — Enable the buttons at the back of the display.
			The default setting is Off.
	Set Monitor ID		Assign a unique, two-digit number between 01 and 25 to this
			display. You will see this number if you have daisy chained the
			IR ports of several displays. HP Network Sign Manager also
			uses it to communicate directly with the display.
			The default setting is 01.

ENWW Using the On-Screen Display menu 41