HP 2311gt Diagonal 3D Connecting the DVI-D Video Cable not provided, Connecting the Power Cord

Connecting the DVI-D Video Cable (not provided)

Connect one end of the DVI-D video cable to the back of the monitor and the other end to the DVI-D video connector on the computer. You can use this cable only if your computer has a DVI compliant graphics card that is either integrated or installed. The DVI-D connector and cable are not included with the monitor.

Figure 3-5Connecting the DVI-D Cable (cable not provided)

Connecting the Power Cord

1.Follow all electrical and power warnings

WARNING! To reduce the risk of electric shock or damage to your equipment:

Do not disable the power-cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet.

Be sure that the grounded power outlet you plug the power cord into is easily accessible to the operator and located as close to the equipment as possible. A power cord should be routed so that it is not likely to be walked on or pinched by items that are placed on it or against it.

Do not place anything on power cords or cables. Arrange them so that no one might accidentally step on or trip over them. Do not pull on a cord or cable.

See Technical Specifications on page 34 for additional information.

10 Chapter 3 Setting Up the Monitor ENWW