Baumatic BGG64W manual Installation, Maintaining the cast iron pan stands

Page 17

oIMPORTANT: Make sure that you reassemble the burners in the original way.

Maintaining the cast iron pan stands

oIMPORTANT: Make sure that the hob surface and pan stands have cooled before you attempt to touch them.

oWipe the pan stands over with a soft, damp cloth that has been put into warm soapy water. The cloth should be wrung out after being taken out of the soapy water.

oUsing a paper towel, thoroughly dry the pan stands.

oTo maintain the appearance of the cast iron pan stands, we would recommend that you rub a small amount of olive oil into the pan stands, after you have finished cleaning them.

Installation

The installation must be carried out by a GASSAFE registered installer, in accordance with the current version of the following.

oGas Safety Regulations (Installation & Use)

oBuilding Regulations (issued by the Department of Environment)

o Building Standards (Issued by the Scottish Development Department)

oIEE Wiring Regulations

oElectricity at Work Regulations BS 6172

oInstallation of Domestic Gas Cooking Appliances (if necessary, BS 5482 Installation of Domestic LPG Appliances)

oBS 5440 Installation of Flues and Ventilation for Gas Appliances

oBaumatic Ltd Installation Instructions

17

Image 17 Contents
BGG30 / BGG32 / BGG60 / BGG64 / BGG70 / BGG74 Gas hobs BGG30 / BGG32 Cm Burner gas hob BGG60 / BGG64 Contents Environmental note General Information Important safety informationDuring use Child SafetyGeneral Safety Declaration of conformity CleaningInstallation  Flame failure safety device on each burner SpecificationsProduct specifications BGG64 BGG60 / BGG64 Product dimensions Aperture dimensionsProduct specifications BGG60 Product specifications BGG70 / BGG74 Product dimensions Aperture dimensionsSupply Connection Rated VoltageMax Rated Inputs Mains Supply LeadBGG60 Gas hob surface layoutBGG64 Switching the hob on Using the gas hobAutomatic ignition with flame failure safety device Before first useMinimum Maximum Diametre Energy saving tipsCleaning the hob top CleaningCleaning the hob burners After each useMaintaining the cast iron pan stands InstallationPositioning Unpacking the appliance Installing the applianceBGG30 / BGG32 BGG60 / BGG64 BGG70 / BGG74 All models Important information Gas connectionVentilation requirements Important On completion carry out a gas soundness test Gas Safety Installation and Use RegulationsPropane Gas adjustment Conversion to LPGButane Minimum flow adjustment for hob gas taps Gas tap maintenance Replacing the mains supply cable Switch the appliance off at your mains supplyElectrical connection Do not Attempt to Repair the Appliance Yourself My appliance isn’t working correctlyBaumatic Consumables United Kingdom
Related manuals
Manual 32 pages 55.37 Kb Manual 1 pages 38.23 Kb