Gas adjustment (Conversion to LPG)
All work must be carried out by a GASSAFE registered engineer.
IMPORTANT: Always isolate the hob from the electricity supply before changing the injectors and/or adjusting the minimum flow of the burners.
o Remove the
oUnscrew the injector (B) and replace it with the stipulated injector for the new gas supply (see table on next page).
GENERAL INJECTORS TABLE
Kind of gas | Nozzle | Burners | Power (in watts) | |
| mm/100 |
| Max. | Min. |
Natural | 95/55/95 | Wok | 3800 | 1700 |
| 129 | Rapid | 3000 | 1500 |
| 97 | 1750 | 900 | |
| 76 | Auxiliary | 1000 | 500 |
L.P.G. | 65/41/65 | Wok | 3800 | 1300 |
Butane | 87 | Rapid | 3000 | 700 |
Propane | 65 | 1750 | 400 | |
| 51 | Auxiliary | 1000 | 350 |
oReassemble all the burners carefully; in particular you should make sure that the flame spreader is correctly placed on the burner.
oIMPORTANT: The minimum flow adjustment process must be completed before the appliance is next used.
25